產品介紹
產品名稱: 風速傳感器
型號系列:010C
品牌:metone
產地:美國
價格:**終成交價格需聯系客服
風速傳感器 010C
010C 風速傳感器提供有關水平風速的準確和詳細的信息。輕巧的三杯風速計幾乎用于所有對快速響應和低啟動閾值至關重要的應用。
020C 風向傳感器提供方位角數據，用于與業務研究和研究相關的微氣象測量。輕型翼型葉片直接耦合到單個精密電位器。當需要低啟動閾值、高阻尼比或短延遲距離時，這些傳感器特別有用。
風速和風向傳感器都用于從南極寒冷到干旱沙漠炎熱的環境。01OC、010C-1 和 020C 儀器符合美國 EPA 和 NRC 對關鍵監管、研究或科學測量應用的性能規范。
風速傳感器 010C 特征
低啟動門檻
內部加熱器延長軸承壽命
低調以**程度地減少“傳感器湍流”
高阻尼比
延遲距離短
快速斷開連接器
可現場更換的電子元件
防護等級 65 (IP65)
可靠性
010C 和 020C 由不銹鋼和陽極氧化鋁組件制成，在功能上比任何其他同類傳感器更可靠：
內置的電場浪涌保護大大減少了與靜電場、未遂雷擊和接地系統不良相關的問題
包含 Met One Instruments 的內部加熱器（僅限交流使用）通過軸承提供積極的清潔抽吸，大大延長了它們的壽命
可選的外部除冰加熱器套管，適用于可能遇到凍雨、結冰和低風速的應用
風速傳感器 010C 應用：
環境監測
氣候研究
中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。
英文原文：
Wind Speed Sensor 010C – Wind Direction Sensor 020D
The 010C Wind Speed Sensor provides accurate and detailed information on horizontal wind speed. The lightweight three-cup anemometer is used in virtually all applications where fast response and low starting threshold(s) are of paramount importance.
The 020C Wind Direction Sensor provides azimuth data for use in micrometeorological measurements related to operational studies and research. The lightweight airfoil vane is directly coupled to a single precision potentiometer. These sensors are especially useful when a low starting threshold, a high damping ratio, or a short delay distance is required.
Both wind speed and wind direction sensors are used in environments ranging from Antarctic cold to arid desert heat. The 01OC, 010C-1, and 020C instruments meet U.S. EPA and NRC performance specifications for critical regulatory, research or scientific measurement applications.
FEATURES
Low starting threshold
Internal heater for long bearing life
Low profile to minimize “sensor turbulence”
High damping ratio
Short delay distance
Quick-disconnect connector
Field-replaceable electronic components
Ingress Protection Level 65 (IP65)
RELIABILITY
The 010C and 020C are made of stainless steel and anodized aluminum components and are functionally more reliable than any other sensors of their kind:
Built-in electrical field surge protection greatly reduces problems associated with static fields, near-miss lightning hits, and poorgrounding systems
Inclusion of Met One Instruments’ internal heater (AC use only) provides positive clean aspiration through the bearings, greatly increasing their life
Optional, external de-icing heater sleeve for applications where freezing rain, ice, and low wind speeds may be encountered
APPLICATIONS:
Ambient Monitoring
Climate Research
