美國YSI控制器IQ SensorNet 282-284

 產品名稱: 控制器

型號系列:IQ SensorNet 282-284

品牌:YSI

產地:美國

價格:**終成交價格需聯系客服






借助易于擴展的解決方案，282 和 284 控制器可以連接到 1-4 個傳感器，**多可以測量 20 個參數。隨時輕松添加或更改傳感器 - 所有 IQ SensorNet 傳感器都與 282 和 284 控制器兼容。這種完全模塊化的即插即用系統使您能夠連續準確地監控和控制廢水處理設施中的過程。

YSI IQ SensorNet 模塊化、連續水質監測和控制系統

美國YSI控制器IQ SensorNet 282-284概述

YSI IQ SensorNet 282 和 284 控制器是用于完整傳感器網絡的模塊化系統。這個功能強大、可靠的系統在過程控制設施的任何地方持續測量您的水質參數。直接的好處包括更好的網絡可見性和管理、及早發現網絡故障、提高對監管目標的合規性以及節省成本（能源、泵/鼓風機維護、勞動力）。

IQ SensorNet 282 和 284 控制器具有易于閱讀的數字顯示屏和 USB 接口以及用于進一步分析和故障排除的數據記錄功能。282 和 284 可以連接幾乎任何通信協議，包括 MODBUS TCP、MODBUS RTU、PROFIBUS 和 PROFINET。

282 或 284 系統能夠測量：
溶解氧（光學或電化學）
酸堿度
ORP
電導率
溫度
正磷酸鹽
濁度——超聲波清洗
TSS（總懸浮固體）——超聲波清洗
銨
硝酸鹽
亞硝酸鹽——超聲波清洗
NOx——超聲波清洗
鉀
氯化物*
COD/BOD——超聲波清洗
TOC（總有機碳）——超聲波清洗
DOC（TOC的溶解有機碳份額）——超聲波清洗
SAC（光譜吸收系數）——超聲波清洗
鹽度
污泥水平
比電導
UVT-254 – 超聲波清洗
*氯化物可以在終端的菜單中看到，但只有**后一個值。在 NitraLyt 或 VARiON 傳感器上用作硝酸鹽補償時，沒有實時監測和控制功能。

整個系統可容納 1 到 4 個傳感器，用于上述參數的任意組合。隨時隨地添加傳感器或輕松更換傳感器。只需更改傳感器（參數）并開始獲取新參數的數據。

只有 YSI 可以為您提供：
3年質保
防雷保護
模塊化擴展
一根用于電源和通信的電纜
專門的專家回答您的任何應用問題


中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。
英文原文：

With an easily scalable solution, the 282 and 284 controllers can connect to 1-4 sensors, allowing up to 20 parameters to be measured. Add or change sensors at any time with ease - all IQ SensorNet sensors are compatible with the 282 and 284 controllers. This completely modular plug-and-play system allows you to monitor and control the process in your wastewater facility continuously and accurately.

IQ SensorNet Video Playlist

YSI IQ SensorNet modular, continuous water quality monitoring and control system

Overview
The YSI IQ SensorNet 282 and 284 controllers are a modular system for a complete sensor network. This powerful, reliable system continuously measures your water quality parameters anywhere in a facility for process control. Immediate benefits include better network visibility and management, early detection of network failures, improved compliance with regulatory targets and cost savings (energy, pump/blower maintenance, labor).

The IQ SensorNet 282 and 284 controllers have an easy-to-read digital display and a USB interface and data logging capabilities for further analysis and troubleshooting. The 282 and 284 can connect to almost any communication protocol including MODBUS TCP, MODBUS RTU, PROFIBUS and PROFINET.

The 282 or 284 system is capable of measuring:

Dissolved oxygen (optical or electrochemical)
pH
ORP
Conductivity
Temperature
Orthophosphate
Turbidity - ultrasonic cleaning
TSS (total suspended solids) - ultrasonic cleaning
Ammonium
Nitrate
Nitrite – ultrasonic cleaning
NOx – ultrasonic cleaning
Potassium
Chloride*
COD / BOD - ultrasonic cleaning
TOC (total organic carbon) - ultrasonic cleaning
DOC (dissolved organic carbon share of TOC) - ultrasonic cleaning
SAC (spectral absorption coefficient) - ultrasonic cleaning
Salinity
Sludge Level
Specific conductance
UVT-254 – ultrasonic cleaning
*Chloride can be seen in the menu on the terminal but only the last value. There is no real-time monitoring and control function when used on the NitraLyt or VARiON sensor as compensation for nitrate.

The entire system accommodates 1 to 4 sensors for the above listed parameters in any combination. Add sensors at any time and at any location or exchange them with ease. Simply change sensors (parameters) and start getting data for the new parameter.

Only YSI can offer you:

3-year warranty
Lightning protection
Modular expansion
One cable for power AND communications
Dedicated experts to answer any of your application questions