美國YSI ProSolo手持式套件ODO-CT

 產品名稱: ProSolo手持式套件

型號系列:ODO-CT 

品牌:YSI

產地:美國

價格:**終成交價格需聯系客服






ProSolo ODO/CT 套件包括數字 ProSolo 手持設備、光學溶解氧和溫度探頭組件（4 或 10 米電纜長度）和軟邊手提箱。

概述
ODO/CT 探頭組件與 ProSolo 手持設備配對，形成一個完整的采樣系統。

ODO/CT 具有集成的數字傳感器，即插即用，可**限度地減少儀器設置所花費的時間。Pro DIGITAL 技術允許手持設備自動識別連接的傳感器，因此無需告訴儀器連接的是什么。光學溶解氧 (ODO) 技術是非消耗性的，這意味著在測量過程中不會消耗氧氣。不存在流量依賴性，也不需要攪拌，從而可以從探頭獲得**準確的 DO 測量值。ODO 傳感器不易受到其他氣體的干擾，漂移更少，并且比膜覆蓋傳感器保持校準時間更長。使用一個至少可以使用兩年的簡單螺紋光學蓋，維護變得輕而易舉。

一體式 4 電極電導池旨在實現**的現場性能和**少的維護。使用隨附的電導刷可輕松清潔堅固的傳感器。還包括一個量筒，以減少用于校準的電導率標準溶液的量。

ProSolo 手持設備具有易于閱讀的彩色顯示屏、大容量內存、直觀的界面、可充電電池和功能強大的數據管理軟件 (KorDSS)，可提供強大而方便的采樣體驗。非常適合地表水、地下水、沿海/河口、水產養殖和廢水應用！

ProSolo ODO/CT 套件功能包括：
光學溶解氧、電導率和溫度傳感器采用單一探頭/電纜設計，由手持設備自動識別，減少了設置時間
自動補償鹽度的 DO mg/L 測量值；無需輸入鹽度補償值
具有 2 年保修的堅固光學 DO 傳感器蓋預安裝在新組件上
探頭安裝在帶有加重不銹鋼探頭護罩的 1 英寸井中
長壽命可充電鋰離子電池為手持設備和探頭供電，持續一整天的采樣
彩色顯示屏和背光鍵盤允許在所有照明條件下進行采樣
堅固的防水外殼（IP-67 等級）和軍用規格 (MS) 連接器
具有廣泛的站點列表和數據 ID 標簽功能的大內存（>100,000 個數據集）
KorDSS 軟件（包括在內）和 USB 移動連接器有助于數據管理
手持設備保修 3 年；電纜、傳感器和 ODO 蓋 2 年保修

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。
英文原文：

The ProSolo ODO/CT kit includes the digital ProSolo handheld; an optical dissolved oxygen, conductivity, and temperature cable/probe assembly (4 or 10 meter cable length); and a soft-sided carrying case.

Need a different ODO/CT cable length for your ProSolo system? Visit the ProSolo ODO/CT system page.

Overview
The ODO/CT probe assembly pairs with the ProSolo Handheld to form a complete sampling system.

Featuring integral, digital sensors, the ODO/CT is plug-and-play which minimizes time spent on instrument setup. Pro DIGITAL technology allows the handheld to automatically recognize connected sensors, so there is no need to tell the instrument what is connected. Optical Dissolved Oxygen (ODO) technology is non-consumptive, meaning oxygen is not consumed during the measurement. Flow dependence is non-existent and no stirring is required, resulting in the most accurate DO measurements available from a probe. The ODO sensor is not susceptible to interferences from other gases, drifts less and holds calibration longer than membrane covered sensors. Maintenance is a breeze with a simple, threaded optical cap that is good for at least two years.

The integral 4-electrode conductivity cell is designed for maximum field performance and minimal maintenance. The robust sensor is easily cleaned with the included conductivity brush. A graduated cylinder is also included to reduce the amount of conductivity standard solution used for calibration.

The ProSolo Handheld features an easy-to-read color display, large capacity memory, intuitive interface, rechargeable battery, and powerful data management software (KorDSS) for powerful, yet convenient sampling experience. Great for surface water, groundwater, coastal/estuarine, aquaculture, and wastewater applications!

The ProSolo ODO/CT kit features include:
Optical dissolved oxygen, conductivity, and temperature sensors in a single probe/cable design that is automatically recognized by the handheld, reducing set-up time
Automatically compensates DO mg/L measurements for salinity; no need to enter salinity compensation values
Rugged Optical DO sensor cap with a 2-year warranty is pre-installed on new assemblies
Probe fits in a 1 inch well with a weighted, stainless steel probe guard
Long-life rechargeable lithium-ion battery to power handheld and probe through a full day of sampling
Color display and backlit keypad allow for sampling in all lighting conditions
Rugged, waterproof case (IP-67 rated) and military-spec (MS) connectors
Large memory (>100,000 data sets) with extensive site list and Data ID tag capabilities
KorDSS software (included) and USB on-the-go connector assist with data management
3-year warranty on handheld; 2-year warranty on cable, sensors, and ODO cap