產品介紹
產品名稱: 硝酸鹽傳感器
型號系列:EXO NitraLED UV
品牌:YSI
產地:美國
價格:**終成交價格需聯系客服
用于淡水環境的 EXO NitraLED UV 硝酸鹽傳感器
608090 EXO NitraLED 套件包括用于 EXO2 和 EXO3 安裝的必要對準環和雨刷。
608040 EXO NitraLED 傳感器僅包括用于 EXO1 采樣應用的傳感器。
該傳感器必須安裝到 EXO 信號發生器 中才能發揮作用。不能單獨發揮作用。
EXO NitraLED UV 硝酸鹽傳感器概述
EXO NitraLED 采用**的 UV LED 技術,是一種光學硝酸鹽傳感器,專為長期、低漂移監測而設計。
美國YSI硝酸鹽傳感器EXO NitraLED UV概述
硝酸鹽監測
EXO NitraLED 采用**的 UV LED 技術,是一種光學硝酸鹽傳感器,專為長期、低漂移監測而設計。天然有機物 (NOM) 和濁度的內置校正可**限度地減少對淡水環境的干擾。其緊湊的外形允許與任何 EXO 信號發生器無縫集成。
緊湊而準確
EXO 平臺提供了一種全新的方法 - 高度準確、快速響應的傳感器,采用小型、易于部署和易于維護的封裝。需要復雜集成的大而復雜的傳感器布置已經一去不復返了。
智能探頭
所有 EXO 傳感器都具有板載內存和處理能力,允許用戶在一個位置輕松校準和配置傳感器并分發到各個現場站點。智能傳感器可從 EXO 探測器的任何端口自動識別,使傳感器有效載荷可互換且完全可定制。
智能端口
濕式可插拔連接器允許在潮濕條件下進行交換,而智能端口會關閉任何過多的電流消耗以防止損壞。
專為與 EXO 多參數探空儀一起使用而設計
• EXO1 探空儀 有 4 個端口,直徑更小
• EXO2 探空儀有 7 個端口,用于終極監測平臺
• EXO3 探空儀 有 5 個端口,使用中央刮水器可以降低成本
• EXO2s 探空儀提供相同的功能和 EXO2 一樣,但沒有電池倉
美國YSI硝酸鹽傳感器EXO NitraLED UV規格
EXO 傳感器與 YSI 6 系列探測器、傳感器或手持設備不兼容。
1這些僅適用于純水中的硝酸鹽組成的分析物,不包括所有其他吸收物質。
2假設部署時間為 30 天,記錄間隔為 15 分鐘,不考慮因結垢引起的漂移。
中文內容來自機器翻譯,內容僅供參考,實際內容可參考原廠介紹或以合同為準。
英文原文:
EXO NitraLED UV Nitrate Sensor for Freshwater Environments
608090 EXO NitraLED Kit includes necessary Alignment Ring and Wiper Brush for EXO2 and EXO3 installations.
608040 EXO NitraLED Sensor includes only the sensor for use in EXO1 sampling applications.
This sensor must be installed into an EXO Sonde to function. Does not function on its own.
EXO NitraLED UV Nitrate Sensor Overview
Utilizing state-of-the-art UV LED technology, EXO NitraLED is an optical nitrate sensor designed for long-term, low-drift monitoring.
Overview
Nitrate Monitoring, Enlightened.
Utilizing state-of-the-art UV LED technology, EXO NitraLED is an optical nitrate sensor designed for long-term, low-drift monitoring. Built-in corrections for Natural Organic Matter (NOM) and Turbidity minimize interference in freshwater environments. Its compact form factor allows for seamless integration with any EXO Sonde.
Compact and Accurate
The EXO platform offers a completely new approach - highly accurate, quick-response sensors in a small, easy-to-deploy and easy-to-maintain package. Gone are large and complicated sensor arrangements requiring complex integration.
Smart Probes
All EXO sensors have onboard memory and processing, allowing users to easily calibrate and configure sensors at one location and distribute to various field sites. Smart sensors are auto-recognized from any port of an EXO sonde making sensor payloads interchangeable and completely customizable.
Smart Ports
Wet-mateable connectors allow for swaps in wet conditions, while the smart ports shut down any excessive current draws to prevent damage.
Designed for Use with EXO Multiparameter Sondes
• EXO1 sonde has 4 ports and a smaller diameter
• EXO2 sonde has 7 ports for the ultimate monitoring platform
• EXO3 sonde has 5 ports for a lower cost option using the central wiper
• EXO2s sonde offers the same features as the EXO2, but without the battery compartment
Specifications