英國CASELLA靜態粉塵采樣箱套裝監測檢測儀CEL-712

 


英國CASELLA靜態粉塵采樣箱套裝監測檢測儀CEL-712

對于需要監測現場內、內部或外部或邊界的現場操作員和經理而言，Casella 科賽樂靜態粉塵采樣箱是測量測量現場粉塵的理想工具。該設備由 Microdust Pro、實時、記錄粉塵監測儀和個人采樣泵組成，全部安裝在 IP65 的堅固外殼中。這意味著您可在室內和室外使用靜態粉塵采樣箱，并且其黑色外殼不顯眼，因此不會引起注意。靜態粉塵采樣箱內置電池可運行長達 13 小時，因此可應對多個班次需求，且無需更換。Casella 科賽樂靜態粉塵采樣箱還可選擇帶有可選配件的微粒粒徑，無論是總可吸入性或呼吸性微粒的職業衛生測量還是還是環境微粒 PM2.5 和 PM10。Casella 科賽樂靜態粉塵采樣箱可隨時間記錄數據，并可使用 Casella 科賽樂 Insight 數據管理軟件下載這些數據以供評估和報告。Insight 生成圖表和摘要數據，讓您輕松識別粉塵水平、熱點和關注領域的趨勢，以便在必要時做出明智的決策和行動。

• 粉塵水平實時圖形顯示
• 圖標驅動用戶界面，簡單易用
• 范圍廣泛：0.001 mg/m3 至 250 g/m3
• 總粉塵采樣（呼吸性，PM2.5 或 PM10，配有可選適配器）
• 電池壽命長
• 專屬現場校準插頭
• 配有 500 運行內存的數據記錄
• 下載至 Insight 軟件進行分析和報告

CASELLA靜態粉塵采樣箱套裝監測檢測儀CEL-712應用：

• 環境空氣采樣
• 現場合規調查
• 靜態工作場所監控

CASELLA靜態粉塵采樣箱套裝監測檢測儀CEL-712主要性能：

• 重量和實時粉塵數據
• 便于操作
• 運行時長可達 13 小時
• 可針對 TSP、PM10、PM2.5 和可吸入粉塵進行采樣
• 可拆卸和單獨使用單個設備
• 無需外部電源

CASELLA靜態粉塵采樣箱套裝監測檢測儀CEL-712技術規格： 

電池壽命： 典型 > 13 小時
工作條件： 相對濕度 5 至 90%（非冷凝）。溫度 0 至 40°C。
保護等級： IP65

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。
英文原文：

For site operators and managers who need to monitor the dust levels within their site, inside or outside, or at the boundary, the Casella Dust Detective is the ideal tool for survey measurements. It comprises of the Microdust Pro, a real time, logging dust monitor and a personal sampling pump all housed in a rugged casing to IP65. This means that you can use the Dust Detective both indoors and out and it’s unobtrusive with its black casing so will not draw attention. The Dust Detective will work off the internal batteries for up to 13 hours, so more than a shift, without change.The Casella Dust Detective is also capable of size selection of fractions with optional accessories, whether Occupational Hygiene measurements of Total Inhalable or Respirable fractions or the Environmental fractions, PM2.5 and PM10. The Casella Dust Detective logs the data over time and this can be downloaded for evaluation and reporting purposes using Casella Insight Data Management Software. Insight generates graphs and summary data allowing you to easily identify trends in the dust levels, hotspots and areas of concern for you to make informed decisions and action as necessary.

• Real-time graphical display of dust levels
• Simple icon driven user interface
• Extensive range: 0.001mg/m3 to 250g/m3
• Sampling for total dust, (respirable, PM2.5 or PM10 with optional adaptor)
• Long battery life
• Unique on site calibration insert
• Data logging with 500 run memory
• Downloads to Insight Software for analysis and reporting

Applications
• Environmental Air Sampling
• Site Compliance Survey
• Static Workplace Monitoring
Key Features
• Gravimetric & real-time dust data
• Ease of operation
• Operates up to 13 hours
• Samples for TSP, PM10, PM2.5 and respirable fractions
• Individual instruments can be removed and utilised seperately
• No external power supply required
Technical Specification
Refer to Microdust Pro and Apex2 Personal Air Sampling
datasheets for detailed information.
Battery Life: Typically > 13 hours
Operating Conditions: Relative humidity of 5 to 90% (noncondensing). Temperature 0 to 40°C.
Protection: IP65